faux wood panels for walls
Material Details：All products are manufactured out of 100% reclaimed wood that is recovered
Installation Type:Peel & Stick
Panel style :Barnwood
1.Prepare a clean, dry and flat wall
A.Dust on the wall will form a cover layer, once we stick products on it with self adhesive tape, the tape will only stick to that dust layer and might fall down with it.
B.Water or high humidity will affect the viscidity of tape, must apply products on dry area.
C.If installed area is waved, tape will not be able to achieve full application of sticking on the applied surface, will affect its adhesive strength.
2. Design & Measure the installed space Design the pattern according to our guideline or you can design by yourself.
Lever the wall with spirit level and do some marking to avoid further adjustment. (Once pasted, it will be difficult to move again the products)
3. Peel 1/5 part of tape from one end, make sure it is positioned well
4. Stick the wood plank to the wall, slowly peel the rest tape off and press the whole plank on the wall to stick as firmly as possible.
Production Line and equipment
Package and warehouse